Efforts To Reduce Downgrade Of Steel Pipes In The Production Process Using The HEART Method

Upaya Mengurangi Downgrade Pipa Baja Pada Proses Produksi Menggunakan Metode HEART

  • Irfan Widya Julianto Universitas Muhammadiyah Sidoarjo, Indonesia
  • Hana Catur Wahyuni Universitas Muhammadiyah Sidoarjo, Indonesia
Keywords: human error probability, kualitas

Abstract

Pt X is a company that produces steel pipe of various shapes and size. In the production procces not only using machines but also using humans as operators. So in this case humans play an important role in maintaining the quality of production. The purpose of this study is to analyze the human error probability with  Human Error Assessment and Reduction Technique method (HEART). HEART is a method designed as a fast and simple human reliability assessment in quantifying the risk of human error. From this research, it was found that 3 tasks had a high HEP value which caused the decline in pipe quality during the production process, namely task 3.2, 4.1 and task 3.4. Which has the highest HEP value on task 3.2, namely setting the machine with a value of 0,7680. The cause is due to the lack of operator expertice and the center roll was not carried out when installing it, so that training is needed to increase operator expertice.

References

[1] Khoirunnisa; Gerry Ganika, ”Analisis Kecacatan Produk Sebagai Upaya Perbaikan Kualitas Menuju Zero Defect, ” Jurnal Manajemen dan Bisnis, Vol. IX, No.1, Hal 121-135, 2016.
[2] S. Masitoh, Y. H. Yadi and A. S. Mariawati, ”Analisa Tingkat Keandalan Operator Inside Welding dengan Metode Human Error Assessment and Reduction Technique,” Jurnal Online Teknik Industri Universitas Sultan Ageng Tirtayasa, 2013.
[3] T. Pradana and W. A. A. Pradana, ”Sistem Informasi Pengendalian Kualitas Untuk Mengetahui Cacat Produk Pipa,” Jurnal SPIRIT Teknik Informatika, Vol. 11, No. 1, hal 68 – 72, 2019.
[4] Rendy Kaban, ”Pengendalian Kualitas Kemasan Plastik Pouch Menggunakan Statistical Procces Control (SPC) Di Pt Incasi Raya Padang,” Jurnal Optimasi Sistem Industri, Vol.13, No.1, Hal 518-547, 2014.
[5] Purwanto, M. F. Sufa and R. Fitriadi, ”Analisis Human Error Operator Mesin Ring Yarn Dengan Metode Human Error Assessment And Reduction Technique ( HEART ),” Jurnal Online Teknik Industri Universitas Muhammadiyah Surakarta, 2014.
[6] A. S. Pamuka and N. Susanto, ”Human Reliability Assesment Dengan Metode Heart Sebagai Upaya Mengurangi Human Error Pada Pt. Multipanel Intermitra Mandiri,” Jurnal Online Teknik Industri Universitas Diponegoro Semarang, 2016.
[7] Y. Widharto, D. Iskandari and D. Nurkertamanda, ”Analisis Human Reliability Assessment Dengan Metode HEART STUDI KASUS PT ABC,” Jurnal Online Teknik Industri Universitas Diponegoro, Vol.13, No.3, Hal 141-150, 2018.
[8] Maya Masita, ”Analisis Human Error Dengan Metode Sherpa Dan Heart Pada Proses Produksi Batik Cap Studi Kasus di UKM Batik Cap Supriyarso Kampoeng Batik Laweyan,” Jurnal Online Teknik Industri Universitas Muhammadiyah Surakarta, 2017.
[9] M. F. Sufa, Purwanto and R. Fitriadi, ”Analisis Human Error Operator Mesin Ring Yarn Dengan Metode Human Error Assessment And Reduction Technique (Heart),” Jurnal Penelitian Universitas Muhammadiyah Surakarta, Hal 827-834, 2014.
[10] Y. L. W. Astuti and S. Saptadi, ”Usulan Rekomendasi Perbaikan Pada Proses Pengecoran ( Concrete Filling ) Dan Pengeluaran Produk Beton ( De-Moulding ) Berdasarkan Analisa Keandalan Manusia Menggunakan Metode Human Error Asessment And Reduction Technique ( Heart ) Di Pt Wijaya Karya Beton Tbk,” Jurnal Online Teknik Industri Universitas Diponegoro, 2017.
[11] Erma Safitri, ”Pengaruh Pelatihan Dan Disiplin Kerja Terhadap Kinerja Karyawan,” Jurnal Ilmiah Manajemen Universitas negeri Surabaya, Vol.1, No.4, 2013.
Published
2021-07-14