Arduino Based Multifunction Fan

Kipas Angin Multifungsi Berbasis Arduino

  • Muhammad Ulum Universitas Muhammadiyah Sidoarjo
  • Izza Anshory Universitas Muhammadiyah Sidoarjo
  • Dwi Hadidjaja Rasjid Saputra Universitas Muhammadiyah Sidoarjo
  • Shazana Dhiya Ayuni Universitas Muhammadiyah Sidoarjo
Keywords: kipas angin, otomais, suhu, manusia, arduino, fan, automatic, temperature, human

Abstract

Fans are electronic equipment that are often found in Indonesia, but fan use is generally still used manually. This can cause the use of fans to be ineffective, and again humans must approach the fan in regulating the fan speed according to room temperature and adjusting the fan direction that is right for use. The purpose of this research is to innovate conventional fans into automatic fans to make it easier and more comfortable for humans to operate. This research method is to explain the design of hardware and software as well as the exposure of the experimental tools. The results of this study are that the fan automatically selects the fan speed according to the temperature read by the DHT11 sensor, and if the read temperature exceeds 350C, the system will spray water vapor through a 12V DC pump and stop if the temperature read is below 350C, then the fan will turn on. On / off automatically according to the presence of people around the fan through the PIR sensor, the temperature indicator and the presence of people are displayed on the 16X2 LCD, then for the fan in terms of turning right-left and spraying perfume can be controlled from a distance of 7 meters via IR remote. Where all these systems are controlled via a microcontroller in the form of ARDUINO UNO

References

S. F. Barrett, “Arduino microcontroller: Processing for everyone,” Synth. Lect. Digit. Circuits Syst., vol. 38, pp. 1–371, 2012.

I. Journal, “IRJET-Measurement of Temperature and Humidity by using Arduino Tool and DHT11.”

D. R. Hulu, “PERANCANGAN SISTEM A LAT PENGENDALIAN PAD A KIPAS ANGIN Dedy Ristanto Hulu , Aditya Perdana , Denny Irvan Sinuhaji , Mardi Turnip,” vol. 3, no. 1, pp. 1–6, 2019.

H. I. Islam, N. Nabilah, S. Sa, and D. H. Saputra, “UDARA RUANGAN BERBASIS ARDUINO UNO DENGAN MENGGUNAKAN SENSOR DHT22 DAN PASSIVE INFRARED ( PIR ),” vol. V, no. Lcd, pp. 119–124, 2016.

A. Pranatha, Zuliantoni, and N. I. Supardi, “o Robot Forklift Berpengendali Infra Red ( Ir ) Remote Control o Analisis Curah Hujan pada DASAirKungkai l ( abupaten Seluma dapat menunjang manusia,” J. llmiah Bid. Sains - Ibknologi Mumi Disiptin dan Antar Disiplin, vol. I, no. 11, 1978.

A. OO and O. TT, “Design and Implementation of Arduino Microcontroller Based Automatic Lighting Control with I2C LCD Display,” J. Electr. Electron. Syst., 2018.

S. Agustina and N. Nugroho, “Analisa Motor Dc (Direct Current) Sebagai Penggerak Mobil Listrik,” J. Mikrotiga, vol. 2, no. 1, 2015.

I. Anshory, D. Hadidjaja, and R. B. Jakaria, “Bldc Motor : Modeling and Optimization Speed Control Using Firefly Algorithm,” Dinamik, vol. 25, no. 2, pp. 51–58, 2020.

I. ANSHORY, I. ROBANDI, J. Jamaaluddi, A. FUDHOLI, and WIRAWAN, “Transfer function modeling and optimization speed response of bldc motor e-bike using intelligent controller,” J. Eng. Sci. Technol., vol. 16, no. 1, pp. 305–324, 2021.

D. A. Apik Issetyorini, “Gaya Gerak Listrik Pada Motor AC,” Tek. Elektro, Polines, pp. 3–6, 2012.

K. Kipas and M. Kipas, “SISTEM KONTROL DAN MONITORING KIPAS ANGIN PADA RUANG KELAS BERBASIS INTERNET OF THINGS CLASS ROOMS FAN CONTROLLING AND MONITORING,” vol. 6, no. 1, pp. 721–733, 2019.

Published
2021-07-14