Welding Quality Engineering Using the Design of Experiment Method (Taguchi's Method)

Rekayasa Kualitas Hasil Las dengan Menggunakan Metode Design of Experiment (Taguchi’s Method)

  • Anis Siti Nurrohkayati Universitas Muhammadiyah Kalimantan Timur
  • Dede Zulrahman Universitas Muhammadiyah Kalimantan Timur
  • Sabaruddin Syach Universitas Muhammadiyah Kalimantan Timur
  • Muhammad Khairul Universitas Muhammadiyah Kalimantan Timur
Keywords: design of experiment, control factor, noise factor, welding

Abstract

The technology in modern era and rapid construction sector has made welding an important role in the field of metal engineering and repair. Therefore, the technology in the construction sector, especially in the engineering sector, requires a welding element. Welding is used to combine with metal. Making this connection requires high skill for welder in order to obtain a good quality connection. The aim of this study was to determine the quality of a good welding result using the design of experiment method by looking at the control factor of the electrode, welding amperage, welding method, plate thickness, and welding speed. In addition to control factors, there are also use noise factors such as skill, cleanliness of work pieces, and distance between work pieces. The results of the experiments are based on weld defect criteria and the DOE method with ANOVA calculations, the best welding results are in trial no 7 with an average value of 0.22. Meanwhile, the results of the experiment with welding defects is trial experiment no 2 with a value of 0.64. The factors that influence the quality of the welds are plate thickness, welding amperage, electrodes, and welding method. Meanwhile, the welding speed factor is a factor that does not significantly affect the weld quality.

References

[1] O. D. Nata et al., “ANALISIS KEKUATAN UJI BENDING PENGELASAN SHIELDED METAL ARC WELDING ( SMAW ) MATERIAL SS400 MENGGUNAKAN KAWAT LAS E6013 BERBAGAI VARIASI ARUS LISTRIK,” vol. 2, pp. 12–15, 2021.
[2] A. Sorgdrager, R. J. Wang, and A. Grobler, “Taguchi method in electrical machine design,” SAIEE Africa Res. J., vol. 108, no. 4, pp. 150–164, 2017, doi: 10.23919/saiee.2017.8531928.
[3] M. Z. Mawahib, S. Jokosisworo, and H. Yudo, “Pengujian Tarik Dan Impak Pada Pengerjaan Pengelasan SMAW Dengan Mesin Genset Menggunakan Diameter Elektroda Yang Berbeda,” Kapal J. Ilmu Pengetah. dan Teknol. Kelaut., vol. 14, no. 1, pp. 26–32, 2017, doi: 10.14710/kpl.v14i1.15533.
[4] F. Azharul, A. Dharmanto, and Wilarso, “TRAKSI: Majalah Ilmiah Teknik Mesin,” TRAKSI Maj. Ilm. Tek. Mesin, vol. 20, no. 1, pp. 45–58, 2020.
[5] D. R. Prajapati and D. V. S. Cheema, “Optimization of Weld Crack Expansion Defect of Wheel Rims by Using Taguchi Approach: A Case Study,” Optimization, vol. 2, no. 8, pp. 3437–3446, 2013, [Online]. Available: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.1056.4721&rep=rep1&type=pdf.
[6] A. S. Nurrohkayati, A. S. Nurrohkayati, and . B., “Identify the Influence of Ingredients and Cake Baking for Cupcake using Design of Experiments,” Int. J. Eng. Technol., vol. 8, no. 1.1, pp. 104–110, 2019, [Online]. Available: https://www.sciencepubco.com/index.php/ijet/article/view/24787.
[7] A. S. Nurrohkayati and M. Khairul, “Identifikasi pengaruh takaran bahan dasar terhadap kualitas mie basah berdasarkan daya serap air dan metode doe,” vol. 6, no. 1, pp. 143–149, 2020.
[8] M. I. Qazi and R. Akhtar, “Strength of Shielded Metal Arc Welding ( SMAW ) Process for,” pp. 97–103, 2019.
[9] S. Rao, P. Samant, A. Kadampatta, and R. Shenoy, “An Overview of Taguchi Method: Evolution, Concept and Interdisciplinary Applications,” Int. J. Sci. Eng. Res., vol. 4, no. 10, pp. 621–626, 2013.
[10] I. Basori, “Analisa Kekuatan Tarik Baja Konstruksi Bj 44 Pada Proses Pengelasan SMAW dengan Variasi Arus Pengelasan,” J. Konversi Energi dan Manufaktur UNJ, vol. Edisi terb, no. April, pp. 72–76, 2014.
[11] W. S. Nugroho, “Buku informasi memperbaiki hasil pengelasan c.24las01.026.01,” pp. 1–67, 2018.
[12] A. Siti, Binyamin, M. Khairul, A. S. Nurrohkayati, and . B., “Identify the Effect of the Different Ingredients for Wet Noodles Based on Water Absorption Using Design of Experiment,” Int. J. Eng. Technol., vol. 9, no. 2, pp. 143–149, 2020, doi: 10.11648/j.ajsea.20200902.11.
Published
2021-04-22