Proposed Production Layout Using Total Closeness Rating (Tcr) Method and Corelap Algorithm in Cv. Faris Collections

Usulan Layout Produksi dengan Menggunakan Metode Total Closeness Rating (Tcr) Dan Algoritma Corelap di Cv. Faris Collections

  • Muhammad Rizky Fauzi Universitas Muhammadiyah Sidoarjo
  • Athika Sidhi Cahyana Universitas Muhammadiyah Sidoarjo
Keywords: Facility Layout, Total Closeness Rating, Activity Reletionship Chart, CORELAP

Abstract

Unplanned layout of the facility and not paying attention to the distance will be able to experience an increase in time during the production process. From the results of observations that have been made at CV. Faris Collections needs to improve the facility layout in department E, namely the grouping of fabrics, due to frequent piling up of fabrics. Lack of utilization of area and distance of material transfer that is too long for department I, namely cloth embroidery. This proposed layout planning uses the TCR method, which is the calculation of the closest associated distance to each production department, which is described in the ARC which requires the relationship between each activity in the area of ​​production so that it fully refers to the TCR calculation results. This planning also uses the CORELAP Algorithm in order to obtain a proposed layout plan that is able to convert qualitative value data into quantitative data. The results of the CORELAP Algorithm are the main basis for knowing the initial lay-out coordinates and the proposed layout, and the coordinate values ​​will be entered into the WinQSB software to determine the level of efficiency. The efficiency level of the CORELAP Algorithm is 9%, and the efficiency of changes between departmental distances in the initial layout and proposed layout is 18%.

References

[1] Adi Sukarno Rachman, 2018."Peramalan Produksi Gula Menggunakan Metode Jaringan Syaraf Tiruan Backpropagation Pada PG Candi Baru Sidoarjo". Malang. Universitas Brawijaya. Fakultas Ilmu Komputer. Teknik Informatika. Vol. 2. No. 2. Halaman 1683-1689.
[2] Evi Kumalasari, 2018. Activity Relationship Chart Sebagai Perancangan Tata Letak Fasilitas Miniplant Pada Produksi Chips Porang Di Desa Jembul. Mojokerto. Universitas Majapahit. Halaman 83 – 88.
[3] Moh, Ririn Rosyadi, 2018. Analisa Tata Letak Fasilitas Produksi Dengan Metode Arc, Ard, Dan Aad Di Pt. Xyz. Gresik. Sekolah Tinggi Teknik Qomaruddin Gresik. Fakultas Teknik. Teknik Industri. Vol. 16. No. 1. Halaman 82 – 95.
[4] Rio Wirawan Nicholas, 2018."Usulan Perancangan Ulang Tata Letak Lantai Produksi untuk Memaksimalkan Area Produksi (Studi Kasus PT. XYZ). Banten. Universitas Unika Atma Jaya Jakarta. Teknik Industri. Jurnal Metris ISSN 1411-3287.
[5] Ukarta Taringan, 2019.”Perancangan Ulang dan Simulasi Tata Letak Fasilitas Produksi Gripper Rubber Seal dengan Menggunakan Algoritma Corelap, Aldep, dan Flexsim”. Sumatra. Universitas Sumatra Utara. Fakultas Teknik. Teknik Industri. Vol. 21. No. 1. Halaman 74-84.
[6] Wresni Anggraini, 2017."Perancangan Ulang Tata Letak Fasilitas Di Pabrik Karet P&P Bangkinang Untuk Optimalisasi Jarak dan Ongkos Material Handling". Pekan Baru. Universitas Indonesia Suska Riau. Fakultas Sains dan Teknologi. Jurusan Teknik Industri. ISSN 2579-5400. Halaman 546-554.
Published
2021-07-08