Fish Feeder for Aquaculture with Fish Feed Remaining and Feed Out Monitoring System Based on IoT

Alat Bantu Pemberi Pakan Ikan Budidaya dengan Sistem Monitoring Sisa Pakan dan Pakan Keluar Berbasis IoT

  • Ali Rizal Fakultas Teknik, Universitas Jember, Jalan Kalimantan No. 37, Kampus Tegal Boto, Jember, Indonesia 68121
  • Gamma Aditya Fakultas Teknik, Universitas Jember, Jalan Kalimantan No. 37, Kampus Tegal Boto, Jember, Indonesia 68121
  • Haidzar Nurdiansyah
Keywords: Fish Feeder, IoT, Monitoring System

Abstract

Feeding fish is a process that affects fish yields. Undisciplined feeding of fish resulted in decreased quality and quantity of fish. The potential for this problem can be reduced by implementing an IoT-based technology. That technology needs to have a monitoring system for remaining feed and the success of feeding. This study using a proximity sensor and infrared distance sensor for the monitoring system for the fish feeder. The results obtained are that the infrared distance sensor can provide information about the remaining fish feed more accurately after being calibrated, the average percentage error of the total test is 5,1%. While the proximity infrared sensor can provide information on the success of throwing feed, from the total testing of the proximity sensor, the success rate of detecting throw feed is 100%. Both information can be monitored via the Blynk platform on the user’s smartphone.    

References

M. Hasanuddin dan A. Andani, “Alat Pemberi Pakan Ikan Otomatis Terjadwal dengan Sistem Kendali Mikrokontroler,” IT Media Informasi IT STMIK Handayani, vol. 10, no. 1, pp. 31-36, 2019.
D. Prijatna dan H. Handarto, “RANCANG BANGUN PEMBERI PAKAN IKAN OTOMATIS,” Teknotan, vol. 12, no. 1, pp. 30-35, 2018.
A. M. Putra dan A. B. Pulungan, “Alat Pemberi Pakan Ikan Otomatis,” JTEV (JURNAL TEKNIK ELEKTRO DANVOKASIONAL), vol. 6, no. 2, pp. 113-121, 2020.
S. Wahyuni, M. Mudarris, A. Askar, S. R. Ayusnin dan S. G. Zain, “PAPAKINOTO (PENEBAR PAKAN IKAN OTOMATIS) ‘UPAYA PENINGKATAN PRODUKSI DAN EFIISIENSI WAKTU BUDIDAYA TAMBAK IKAN TAWAR MASYARAKAT BELAWA KABUPATEN SOPPENG”,” Pendidikan Teknologi Pertanian, vol. 4, no. -, pp. 42-49, 2018.
A. Ardiwijoyo, J. Jamaluddin dan A. M. Mappalotteng, “RANCANG BANGUN ALAT PEMBERI PAKAN IKAN DENGAN SISTEM AUTOMATISASI BERBASIS ARDUINO UNO R3 DENGAN SISTEM KENDALI SMS,” Pendidikan Teknologi Pertanian, vol. 4, no. -, pp. 12-20, 2018.
A. Rayes dan S. Salam, Internet of Things From Hype to Reality, -: Springer, 2019.
W. Cahyadi, M. Sa'id dan A. R. Chaidir, “Optimasi Racing Line pada ECU (Electronic Control Unit) Mobil Listrik Berbasis Fuzzy Logic Control,” ELKOMIKA: Jurnal Teknik Energi Elektrik, Teknik Telekomunikasi, & Teknik Elektronika, vol. 8, no. 2, pp. 454-466, 2020.
S. Valluri, A. G. Sagar dan S. Shanmugam. G , “IOT Based Real Time Monitoring Mobile Robot,” International Journal for Research in Applied Science & Engineering Technology (IJRASET), vol. 5, no. 5, pp. 105-109, 2017.
S. Janpla, N. Tachpetpaiboon dan C. Jewpanich, “Development of Automatic Home-Based Fish Farming Using the Internet of Things,” International Journal of Recent Technology and Engineering (IJRTE), vol. 8, no. 2, pp. 2297-2304, 2019.
D. Sivamani, S. R. Dr. , R. J. Ganesh dan D. A. N. Ali, “Smart Incubator using Internet of Things,” International Journal for Modern Trends in Science and Technology, vol. 4, no. 9, pp. 23-27, 2018.
Published
2021-07-16