Model Manajemen Teknologi Berbasis Risiko
Keywords:
Model, Manajemen, Teknologi, Berbasis, Risiko
Abstract
Puji Syukur kehadirat Alloh SWT, atas ridhonya buku ini
dapat diselesaikan tepat waktu. Buku ini disusun dengan
penuh semangat untuk menyajikan gambaran secara holistik
terkait dengan manajemen teknologi berbasis risiko sehingga
mampu memaksimalkan kinerja dan produktivitas.
Tata kelola penggunaan teknologi mempunyai peran yang
penting untuk menghadapi tantangan yang dihadapi industri
modern dan berdaya saing. Manajemen Teknologi menjadi
suatu hal yang menjadi pertimbangan suatu industri untuk di
terapkan, dalam penerapannya di sertasi dengan pengukuran
risiko. Hal ini menjadi praktik baik suatu industri untuk dapat
meminimalkan risiko yang muncul dan dan meningkatkan
kinerja dan produktivitas.
Downloads
Download data is not yet available.
References
Aas‐Haug, B. and Haskins, C. (2021) ‘The risk maturity
model: a new tool for improved risk management and
feedback’, INCOSE International Symposium, 31(1),
pp. 614–633. Available at:
https://doi.org/10.1002/j.2334-5837.2021.00858.x.
Abidin, N.H.Z. (2017) ‘Factors Influencing the
Implementation of Risk-Based Auditing’, Asian Review
of Accounting, 25(3), pp. 361–375. Available at:
https://doi.org/10.1108/ara-10-2016-0118.
Adiantoro, B. (2020) ‘Analisis Kemampuan Teknologi Pt X
Dengan Pendekatan Teknometrik Dan Analytical
Network Process (Anp)’, Bina Teknika, 15(2), p. 85.
Available at: https://doi.org/10.54378/bt.v15i2.1024.
Adyuta, H.R. and Prabandari, S.P. (2022) ‘PENGARUH
ORIENTASI KEWIRAUSAHAAN, INOVASI
RADIKAL, DAN STRATEGI BISNIS TERHADAP
KINERJA PERUSAHAAN’, JURNAL
KEWIRAUSAHAAN DAN INOVASI, 1(3), pp.
315–323.
Ágoston, S.M.I., van Mourik, P.C. and Strengers, P.F.W.
(2011) ‘Quality risk management: a valuable tool in
implementing, maintaining and improving a quality
management system’, ISBT Science Series, 6(1), pp.
52–55. Available at: https://doi.org/10.1111/j.1751-
2824.2011.01435.x.
Ajjan, H., Kumar, R.L. and Subramaniam, C. (2016)
‘Information technology portfolio management
implementation: a case study’, Journal of Enterprise
Information Management, 29(6), pp. 841–859.
Available at: https://doi.org/10.1108/JEIM-07-2015-
0065.
Alam, W.Y. et al. (2023) Menggali Potensi Manajemen
Inovasi. Edited by A. Sofatunisa. Sumedang: CV. Mega
Press Nusantara.
Almeida, N.M. et al. (2015) ‘Engineering risk management in
performance-based building environments’, Journal of
Civil Engineering and Management, 21(2), pp.
218–230. Available at:
https://doi.org/10.3846/13923730.2013.802740.
De Almeida, N.M. et al. (2015) ‘Managing the technical risk
of performance-based building structures’, Journal of
Civil Engineering and Management, 21(3), pp.
384–394. Available at:
https://doi.org/10.3846/13923730.2014.893921.
Altheide, D. (2010) ‘Risk communication and the’, Intellect,
2(2), pp. 145–158. Available at:
https://doi.org/10.1386/cjcs.2.2.145.
Amirshenava, S. and Osanloo, M. (2018) ‘Mine closure risk
management: An integration of 3D risk model and
MCDM techniques’, Journal of Cleaner Production,
184, pp. 389–401. Available at:
295 Model Manajemen Teknologi Berbasis Risiko
295
https://doi.org/10.1016/j.jclepro.2018.01.186.
An, M., Chen, Y. and Baker, C.J. (2011) ‘A fuzzy reasoning
and fuzzy-analytical hierarchy process based approach
to the process of railway risk information: A railway
risk management system’, Information Sciences,
181(18), pp. 3946–3966. Available at:
https://doi.org/10.1016/j.ins.2011.04.051.
Anes, V. et al. (2018) ‘A new risk prioritization model for
failure mode and effects analysis’, Quality and
Reliability Engineering International, 34(4), pp.
516–528. Available at:
https://doi.org/10.1002/qre.2269.
Anggrahini, D., Karningsih, P.D. and Sulistiyono, M. (2015)
‘Managing Quality Risk in a Frozen Shrimp Supply
Chain: A Case Study’, Procedia Manufacturing, 4(Iess),
pp. 252–260. Available at:
https://doi.org/10.1016/j.promfg.2015.11.039.
Arief, J. and Hakim, R. (2003) ‘Studi Pengembangan Model
Manajemen Risiko Usaha Bangunan Baru C-117 C-
118’, pp. 117–123.
Arum, A. and Payamta, P. (2022) ‘Analysis Of the
Effectiveness of Risk Based Internal Audit
Implementation: A Case Study’, Quality - Access to
Success, 23(190). Available at:
https://doi.org/10.47750/QAS/23.190.09.
Aryanto, R. (2023) Open Innovation: Berkolaborasi untuk
Menjadi Unggul, PPM Manajemen : Solusi Manajemen
Terintergrasi. Available at: https://ppm-
manajemen.ac.id/open-innovation-berkolaborasi-untuk-
menjadi-unggul-bagian-2/ (Accessed: 5 August 2024).
Asadi, P. et al. (2018) ‘Project Risk Evaluation by Using a
New Fuzzy Model Based on Elena Guideline’, Journal
of Civil Engineering and Management, 24(4), pp.
284–300. Available at:
https://doi.org/10.3846/jcem.2018.3070.
Atle ØdegårdandStål Bjørkly (2021) Improving Interagency
Collaboration, Innovation and Learning in Criminal
Justice Systems, Improving Interagency Collaboration,
Innovation and Learning in Criminal Justice Systems.
Edited by S. Hean et al. Cham: Springer International
Publishing. Available at: https://doi.org/10.1007/978-3-
030-70661-6.
Aziz, I. (2024) Inovasi Menemukan Cara Baru dalam
Mengembangkan Bisnis: Motivasi Bisnis bagi Pemula.
Yogyakarta: CAHAYA HARAPAN.
Aziz, R.Z. and Wahyuni, H.C. (2023) ‘Strategy To Increase
Technological Sophistication To Increase Helmet
Productivity With Technometric Methods And 5W1H’,
Indonesian Journal of Innovation Studies, 23, pp. 1–18.
Available at: https://doi.org/10.21070/ijins.v23i.1045.
Badin, P. and Hamid, H. (2022) ‘Risk Management Theory
and Model in Teacher Characters Building Course: A
Literature Review’, ANP Journal of Social Sciences and
Humanities, 3(1), pp. 10–18. Available at:
https://doi.org/10.53797/anp.jssh.v3i1.2.2022.
297 Model Manajemen Teknologi Berbasis Risiko
297
Bahauddin, A. and Minata, P.R. (2015) ‘Analisis dan Strategi
Penanganan Risiko Supply Chain Pada PT . Batik
Banten Indonesia Menggunakan AHP dan’, 14(1), pp.
69–80.
Ball-King, L.N. (2022) ‘Are Misunderstandings over “Risk”
Contributing to Difficulties in Assessing and Managing
Safety in the Public Domain?’, Journal of Service
Science and Management, 15(05), pp. 516–530.
Available at: https://doi.org/10.4236/jssm.2022.155030.
Bell, M. (2009) ‘Innovation, Sustainability, Development: A
New Manifesto Innovation Capabiliies and Directions
of Development’, in.
Bhattacharya, J. (2015) ‘Quality Risk Management-
Understanding and Control the Risk in Pharmaceutical
Manufacturing Industry’, International Journal of
Pharmaceutical Science Invention ISSN, 4(1), pp.
29–41.
Binar Academy (2023) ‘70% Perusahaan Gagal
Bertransformasi Digital, Ini Penyebabnya’.
Boehm, J. et al. (2019) ‘The risk-based approach to
cybersecurity’. McKinsey Company.
Brown, P. (2020) ‘Studying COVID-19 in light of critical
approaches to risk and uncertainty: research pathways,
conceptual tools, and some magic from Mary Douglas’,
Health, Risk and Society, 22(1), pp. 1–14. Available at:
https://doi.org/10.1080/13698575.2020.1745508.
BSNI (2018) Manajemen Risiko Berbasis SNI ISO 31000. 1st
edn. Edited by K. Nasrudin Irawan, Mayastria
Yekttiningtyas and W.S.S. Andriani. Jakarta: Badan
Standardisasi Nasional Indonesia.
Carmignani, G. (2009) ‘An integrated structural framework to
cost-based FMECA : The priority-cost FMECA’, 94,
pp. 861–871. Available at:
https://doi.org/10.1016/j.ress.2008.09.009.
Casban, Marfuah, U. and Rosyadi, L.S. (2021) ‘Penerapan
Metode Teknometrik untuk Mengukur Kontribusi
Komponen Teknologi dalam Proses Produksi Industri
Kecil dan Menengah’, JISI: Jurnal Integrasi Sistem
Industri, 8(2), p. 1. Available at:
https://doi.org/10.24853/jisi.8.2.1-12.
Chang, B. (2023) ‘Customer Risk Management and CAPM
Model Application’, Modern Economics &
Management Forum, 4(3), p. 47. Available at:
https://doi.org/10.32629/memf.v4i3.1372.
Chockalingam, A., Dabadghao, S. and Soetekouw, R. (2018)
‘Strategic risk, banks, and Basel III: estimating
economic capital requirements’, Journal of Risk
Finance, 19(3), pp. 225–246. Available at:
https://doi.org/10.1108/JRF-11-2016-0142.
Culp, C.L. (2001) The risk management process: Business
strategy and tactics. John Wiley & Sons.
Dede, O.Ç. (2020) ‘Integrating Heather Douglas’ Inductive
Risk Framework with an Account of Scientific
299 Model Manajemen Teknologi Berbasis Risiko
299
Evidence: Why and How?’, Perspectives on Science,
28(6), pp. 737–763. Available at:
https://doi.org/10.1162/posc_a_00358.
Deloitte (2023) ‘Menuju Penerapan Manajemen Risiko dan
Tata Kelola Terintegrasi Playbook & Deloitte Point of
View’.
Dewi, R.I. and Ilham, I. (2023) ‘Analisis Manajemen Risiko
pada UMKM Menggunakan Iso 31000’, Jurnal Bisnis,
Manajemen, Dan Informatika (Jbmi), 20(2), pp.
124–135. Available at:
https://doi.org/10.26487/jbmi.v20i2.32130.
Digital Transformasi Indonesia-DTI (2023) ‘8 Perusahaan
yang Sukses Melakukan Transforamsi Digital’.
digital worker (2023) ‘Perusahaan yang Sudah Menerapkan
Transformasi Digital’.
Dimyati, M. (2022) Metode Penelitian untuk Semua
Generasi. Jakarta: UI Publishing.
Duval, C. et al. (2012) ‘A Bayesian network-based integrated
risk analysis approach for industrial systems:
Application to heat sink system and prospects
development’, Proceedings of the Institution of
Mechanical Engineers, Part O: Journal of Risk and
Reliability, 226(5), pp. 488–507. Available at:
https://doi.org/10.1177/1748006X12451091.
Elliott, M.W. (2018) Risk management principles and
practices. American Institute for Chartered Property
Casualty Underwriters.
Evans, R. et al. (2008) ‘The Caries Management System: an
evidence‐based preventive strategy for dental
practitioners. Application for adults’, Australian Dental
Journal, 53(1), pp. 83–92. Available at:
https://doi.org/10.1111/j.1834-7819.2007.00004.x.
Ezrahovich, A.Y. et al. (2017) ‘Risk-based thinking of ISO
9001:2015 - The new methods, approaches and tools of
risk management’, Proceedings of the 2017
International Conference ‘Quality Management,
Transport and Information Security, Information
Technologies’, IT and QM and IS 2017, pp. 506–511.
Available at:
https://doi.org/10.1109/ITMQIS.2017.8085872.
Fan, L. and Shaffer, S. (2004) ‘Efficiency versus risk in large
domestic US banks’, Managerial Finance, 30(9), pp.
1–19. Available at:
https://doi.org/10.1108/03074350410769245.
Fortune Indonesia (2023) ‘Ada 70 perusahaan gagal
bertransformasi digital ini penyebabnya’.
Galvin, J. (2017) ‘Critical role of risk management in ground
engineering and opportunities for improvement’,
International Journal of Mining Science and
Technology, 27(5), pp. 725–731. Available at:
https://doi.org/10.1016/j.ijmst.2017.07.005.
Ghodang, H. and Fidela (2023) Kepemimpinan
Technopreneurship. Bogor: Halaman Moeka
301 Model Manajemen Teknologi Berbasis Risiko
301
Publishing.
Grobe, D., Douthitt, R. and Zepeda, L. (1999) ‘Consumer risk
perception profiles regarding recombinant bovine
growth hormone (rbGH)’, Journal of Consumer Affairs,
33(2), pp. 254–275. Available at:
https://doi.org/10.1111/j.1745-6606.1999.tb00070.x.
De Groot, K. and Thurik, R. (2018) ‘Disentangling Risk and
Uncertainty: When Risk-Taking Measures Are Not
About Risk’, Frontiers in Psychology, 9(NOV), pp. 1–7.
Available at: https://doi.org/10.3389/fpsyg.2018.02194.
Handayani, R., Utami, E. and Luthfi, E.T. (2023) ‘Systematic
Literature Review on Auditing Information Technology
Risk Management Using the COBIT Framework’,
Prisma Sains Jurnal Pengkajian Ilmu Dan Pembelajaran
Matematika Dan Ipa Ikip Mataram, 11(4), p. 1028.
Available at: https://doi.org/10.33394/j-ps.v11i4.8871.
Handoko, E. (2022) Perusahaan Perlu Menerapkan Transfer
Teknologi dan Bagaimana Proses Transfer Teknologi?,
Kompasiana Beyond Blogging. Available at:
https://www.kompasiana.com/edwinhandoko2833/6294
660bbb448654173782c2/perusahaan-perlu-
menerapkan-transfer-teknologi-dan-bagaimana-proses-
transfer-teknologi?page=all (Accessed: 9 August 2024).
Haning, M.T., Hasniati and Tahili, M.H. (2020) PUBLIC
TRUST: DALAM PELAYANAN ORGANISASI
PUBLIK KONSEP, DIMENSI DAN STRATEGI. 1st
edn. Makassar: UPT Unhas Press. Available at:
https://books.google.co.id/books?id=xrsXEAAAQBAJ
&pg=PA298&dq=Definisi+Inovasi&hl=en&newbks=1
&newbks_redir=0&sa=X&ved=2ahUKEwj9hPCRz-
aHAxVtyzgGHbcvPag4KBDoAXoECAQQAg#v=onep
age&q=Definisi Inovasi&f=false.
Harahap, N.S. (2014) ‘Manajemen Risiko Teknologi
Informasi Menggunakan Framework ISO 31000 (Studi
Kasus: Sistem Infrastruktur TI Telkom Indonesia)’,
Jurnal Sains dan Teknologi Industri, 9(1), pp. 52–66.
Harpster, R.A. (2016) ‘How FMEAs can be the cornerstone
of ISO 2001:2015 compliant risk based quality
management system’, Proceedings - Annual Reliability
and Maintainability Symposium, 2016-April. Available
at: https://doi.org/10.1109/RAMS.2016.7448088.
Hartanto, E.T., Ciptomulyono, U. and Ahmadi, A. (2016)
‘Aplikasi Failure Mode Effect and Criticality Analysis
(Fmeca) Dalam Penentuan Interval Waktu Penggantian
Komponen Kritis Radar Jrc Jma 5310 Pada Kri Satuan
Kapal Patroli Koarmatim’, Asro Journal-Sttal, 6, pp.
1–12.
hasbimutsani (2021) ‘Pengertian Risiko – Jenis, Sumber,
Karakteristik, Dan Contohnya Lengkap’, pp. 1–5.
Hassan, A. and Dayarian, I. (2008) ‘Cost-based FMEA and
ABC Concepts for Manufacturing Process Plan
Evaluation’, pp. 197–202.
Hillson, D. and Murray-Webster, R. (2017) Understanding
and Managing Risk Attitude. Routledge. Available at:
303 Model Manajemen Teknologi Berbasis Risiko
303
https://doi.org/10.4324/9781315235448.
Himamul ’aliyah, S. et al. (2020) ‘Analisis Teknometrik Pada
Galangan Kapal Milik Kud (Koperasi Unit Desa)
Sarono Mino Di Kecamatan Juwana, Kabupaten Pati,
Jawa Tengah’, Journal of Fisheries Resources
Utilization Management and Technology, 9(1), pp.
64–73.
Hubbard, D.W. (2020) The Failure of Risk Management, The
Failure of Risk Management: Why It’s Broken and
How to Fix It. Wiley. Available at:
https://doi.org/10.1002/9781119521914.
IBM (no date) ‘Apa itu manajemen risiko siber?’ IBM.
Indriartiningtias, R. (2010) ‘Diktat manajemen teknologi’.
Integra Tehnologi Solisi (2023) ‘Ini Dia Perbedaan Tata
Kelola IT dan Manajemen IT’.
Iswahyudi, M.S. et al. (2023) PENGANTAR TEKNOLOGI
MANAJEMEN BISNIS. Batam: Yayasan Cendikia
Mulia Mandiri.
jamescookuniversity (2019) ‘Risk Assessment and Quality
Project Management’. James Cook University
Australia.
Julien Florkin (2024) ‘AI dalam Manajemen Risiko: 7 Aspek
Kuat’.
Karim, M.S.A., San, O.T. and Muhammad, H. (2023) ‘The
Decline of Project Management Maturity Models: A
Review Paper’, International Journal of Academic
Research in Business and Social Sciences, 13(5).
Available at: https://doi.org/10.6007/ijarbss/v13-
i5/16972.
Khansa, A. (2021) Pengertian Teknologi: Jenis-Jenis,
Manfaat, Dampak Negatif dan Positif, Gramedia Blog.
Available at: https://www.gramedia.com/literasi/iptek/
(Accessed: 2 August 2024).
Khatib, M. El, Shehhi, H. Al and Nuaimi, M. Al (2023) ‘How
Big Data and Big Data Analytics Mediate
Organizational Risk Management’, Journal of Financial
Risk Management, 12(01), pp. 1–14. Available at:
https://doi.org/10.4236/jfrm.2023.121001.
Koulinas, G.K. et al. (2019) ‘Risk assessment using fuzzy
TOPSIS and PRAT for sustainable engineering
projects’, Sustainability (Switzerland), 11(3). Available
at: https://doi.org/10.3390/su11030615.
Lawlor, A. and Crow, D. (2018) ‘Risk-Based Policy
Narratives’, Policy Studies Journal, 46(4), pp. 843–867.
Available at: https://doi.org/10.1111/psj.12270.
Lesmono, R. (2024) ‘Risiko Menurut ISO 31000 : Wajah
Lain dari Kesempatan’, pp. 2–7.
Lestari, E.R. (2019) Manajemen Inovasi: Upaya Meraih
Keunggulan Kompetitif. 1st edn. Malang: UB Press.
Lewis, L.K. et al. (2006) ‘Advice on communicating during
organizational change: The content of popular press
books’, Journal of Business Communication, 43(2), pp.
305 Model Manajemen Teknologi Berbasis Risiko
305
113–137. Available at:
https://doi.org/10.1177/0021943605285355.
Liliweri, A. (2011) Komunikasi Serba Ada Serba Makna. 1st
edn. Jakarta: Kencana Prenada Media Group. Available
at:
https://books.google.co.id/books?id=MBZNDwAAQB
AJ&pg=PA847&dq=definisi+teknologi&hl=en&newbk
s=1&newbks_redir=0&sa=X&ved=2ahUKEwiYm8jzv
OaHAxUOR2wGHYClCjc4PBDoAXoECA0QAg#v=o
nepage&q=definisi teknologi&f=false.
Liliweri, P.D.A. (2021) Sistem Peralatan Hidup dan
Teknologi: Seri Pengantar Studi Kebudayaan.
Yogyakarta: NUSAMEDIA. Available at:
https://books.google.co.id/books?id=5hVtEAAAQBAJ.
Liu, Y. and Ruan, K. (2023) ‘Application of Kano Model in
Risk Identification of Software Development Projects’,
BCP Business & Management, 40, pp. 33–39.
Available at:
https://doi.org/10.54691/bcpbm.v40i.4357.
Lund, M.S., Solhaug, B. and Stølen, K. (2011) Model-Driven
Risk Analysis, Journal of Chemical Information and
Modeling. Berlin, Heidelberg: Springer Berlin
Heidelberg. Available at: https://doi.org/10.1007/978-3-
642-12323-8.
Ma, X. and Zhang, Y. (2021) ‘Digital Innovation Risk
Management Model of Discrete Manufacturing
Enterprise Based on Big Data Analysis’, Journal of
Global Information Management, 30(7), pp. 1–14.
Available at: https://doi.org/10.4018/JGIM.286761.
Malikova, M.A. (2017) ‘Building Quality Assurance ( QA )
and Risk-Based Quality Management ( RBQM )
Systems into Clinical Research Operations . An
Academic Site Perspective’, 1(617), pp. 1–8.
Marhavilas, P.K. and Koulouriotis, D.E. (2008) ‘A risk-
estimation methodological framework using
quantitative assessment techniques and real accidents’
data: Application in an aluminum extrusion industry’,
Journal of Loss Prevention in the Process Industries,
21(6), pp. 596–603. Available at:
https://doi.org/10.1016/j.jlp.2008.04.009.
Miftakhatun, M. (2020) ‘Analisis Manajemen Risiko
Teknologi Informasi pada Website Ecofo Menggunakan
ISO 31000’, Journal of Computer Science and
Engineering (JCSE), 1(2), pp. 128–146. Available at:
https://doi.org/10.36596/jcse.v1i2.76.
Milosavljević, Z. (2024) ‘Viruses and social mistrust in the
21st century: What can HIV prevention teach us about
the mistrust to COVID-19 vaccines?’, Glasnik javnog
zdravlja, 98(1), pp. 88–100. Available at:
https://doi.org/10.5937/serbjph2401088M.
Nain, A. and Rasli, A.M. (2005) PENGURUSAN
TEKNOLOGI. 1st edn. Johor: Universiti Teknologi
Malaysia.
Nazarova, H. et al. (2022) ‘Transformation of Personnel
307 Model Manajemen Teknologi Berbasis Risiko
307
Management Principles in Modern Management’,
Economics of Development, 21(4), pp. 59–67.
Available at:
https://doi.org/10.57111/econ.21(4).2022.59-67.
NEXTGEN (2022) ‘7 Contoh Transformasi Digital Yang
Berhasil Pada Perusahaan’.
Niazi, S. (2018) ‘Quality Risk Management’, Handbook of
Pharmaceutical Manufacturing Formulations, pp.
15–23. Available at:
https://doi.org/10.3109/9781420081275-4.
Nikolaenko, V. and Sidorov, A. (2023) ‘Assessment of
Project Management Maturity Models Strengths and
Weaknesses’, Journal of Risk and Financial
Management, 16(2), p. 121. Available at:
https://doi.org/10.3390/jrfm16020121.
Paté-Cornell, E. (2002) ‘Risk and uncertainty analysis in
government safety decisions’, Risk Analysis, 22(3), pp.
633–646. Available at: https://doi.org/10.1111/0272-
4332.00043.
Pialles, T. (2017) ‘Study of the Coherences and Dependencies
between Quality and Risk Management, within the
Construction Industry’, pp. 1–64.
PPATK (2022) ‘Penilaian Risiko Sektoral Tindak Pidana
Pencucian Uang Pada Tindak Pidana Penipuan SIBER
Tahun 2022’. PPATK Republik Indonesia.
Praja, A.P. et al. (2022) Kumpulan Studi Kasus Manajemen
Risiko Di Indonesia. 1st edn. Edited by C. Dr. Antonius
Alijoyo, ERMCP, Q. Prof. D. S. Priyarsono, Ph.D, and
E. Surjorimba Suroto, S.E. Ak., MScQM. Bandung: PT.
CIPTA RAYA MEKAR SAHITYA.
Pritchard, P. (2014) Risk Management. Auerbach
Publications. Available at:
https://doi.org/10.1201/9780429438967.
Purwanto, Y. and Pakaya, F. (2022) ‘Penilaian Tingkat
Teknologi Galangan Kapal Politeknik Kelautan Dan
Perikanan Bitung, Sulawesi Utara’, Jurnal Bluefin
Fisheries, 3(2), p. 15. Available at:
https://doi.org/10.15578/jbf.v3i2.112.
Puszka, S. (2021) ‘The “dirty work” of risk in Northern
Territory renal services’, Australian Journal of
Anthropology, 32(1), pp. 54–65. Available at:
https://doi.org/10.1111/taja.12390.
Putra, D.F., Chumaidiyah, E. and Rendra, M. (2020) ‘Analisis
Perbandingan Teknologi Pemilahan Sampah
Berdasarkan Proses Bisnis , Produktivitas , Dan Benefit
Cost Ratio Comparative Analysis of Waste Separation
Technology Based on Business Process , Productivity ,
and Benefit Cost Ratio’, eProceedings …, 7(2), pp.
5276–5283. Available at:
https://openlibrarypublications.telkomuniversity.ac.id/in
dex.php/engineering/article/view/12349.
Qintharah, Y.N. (2019) ‘Perancangan Penerapan Manajemen
Risiko’, Jurnal Riset Akuntansi dan Komputerisasi
Akuntansi, 10(1), pp. 67–86. Available at:
309 Model Manajemen Teknologi Berbasis Risiko
309
https://doi.org/https://doi.org/10.33558/jrak.v10i1.
Retnowati, N. and Mayasari, F. (2017) ‘Analisis Kontribusi
Komponen Teknologi Pada Pdp Kahyangan Kabupaten
Jember’, Jurnal Ilmiah Inovasi, 16(3). Available at:
https://doi.org/10.25047/jii.v16i3.310.
Rezaee, M.J., Salimi, A. and Yousefi, S. (2016) ‘Identifying
and managing failures in stone processing industry
using cost-based FMEA’, The International Journal of
Advanced Manufacturing Technology [Preprint].
Available at: https://doi.org/10.1007/s00170-016-9019-
0.
RISKINDO (2023) ‘Aman dengan ISO 31000 dalam
Management Risiko Bisnis Anda’.
Rohayati Suprihatini E.Gumbira Sa’id, M. (2005) ‘Analisis
Kondisi Komponen-Komponen Teknologi Pengolahan
Di Industri Teh Curah Indonesia’, Journal of
Agroindustrial Technology, 14(3), pp. 101–106.
Samani, M.A. et al. (2017) ‘Development of a conceptual
model for risk-based quality management system’,
Total Quality Management and Business Excellence,
pp. 1–16. Available at:
https://doi.org/10.1080/14783363.2017.1310617.
Samhuri, R., Ahma, N. and Mulyadi (2023) Strategi Inovasi
dalam Perspektif CEO Overconfidence dan CEO
Power. 1st edn. Edited by V. Alimah. Sumedang: CV.
Mega Press Nusantara.
Sanditya, R., Juniani, A.I. and Amrullah, H.N. (2019)
‘Integrated Risk Assessment on Argon Purification Unit
Based on FMECA and Fuzzy-’, 2019(IConBMT).
Santana, S. et al. (2023) ‘Analisis Implementasi Manajemen
Risiko pada UMKM Tasikmalaya (Studi Kasus UMKM
Mie Baso Sarirasa 81)’, Jurnal Bina Manajemen, 11(2),
pp. 60–75. Available at:
https://doi.org/10.52859/jbm.v11i2.309.
Schwandt, M. (2015) ‘Centralization of Risk Management in
Business Companies: A Case Study on the Role of
Specialist Departments’, Case Studies in Business and
Management, 2(1), p. 31. Available at:
https://doi.org/10.5296/csbm.v2i1.7567.
Septiana, A.R. (2020) Manajemen Inovasi: Memenangi
Kompetisi, Mengantisipasi Disrupsi. 1st edn. Jakarta:
Qnerza Publishing.
Septiani, W., Maarif, M.S. and Arkeman, Y. (2013)
‘Manajemen Risiko Inovasi Produk Olahan Susu Sapi
Berdasarkan Tahapan Proses Manajemen Inovasi’,
Jurnal Teknik Industri, 3(2). Available at:
https://doi.org/10.25105/jti.v3i2.1577.
Serafini, A. et al. (2016) ‘Use of a systematic risk analysis
method (FMECA) to improve quality in a clinical
laboratory procedure’, Annali di Igiene, 28(4), pp.
288–295. Available at:
https://doi.org/10.7416/ai.2016.2108.
Situmorang, H.F. (2022) Buku Ajar Praktek Kewirausahaan.
311 Model Manajemen Teknologi Berbasis Risiko
311
Medan: Umsu Press. Available at:
https://books.google.co.id/books?id=AphrEAAAQBAJ
&pg=PT48&dq=bentuk+risiko&hl=en&newbks=1&ne
wbks_redir=0&sa=X&ved=2ahUKEwji7KGhg-
eHAxX8xjgGHVMVO70Q6AF6BAgNEAI#v=onepage
&q=bentuk risiko&f=false.
Solikhah, M. (2024) COBIT 2019: GOVERNANCE
EXCELLENCE AND INSIGHTS FOR IT
GOVERNANCE SUCCESS. Cirebon: CV. Green
Publisher.
Standal, M.I. et al. (2023) ‘An Uncertain Risk Concept?
Perceptions of Uncertainty Among Risk Professionals
in Norwegian Petroleum Companies’, (Esrel), pp.
1943–1950. Available at: https://doi.org/10.3850/978-
981-18-8071-1_p643-cd.
Sugiharto, Y. and Wibowo, S.S. (2020) Manajemen Audit
Teknologi. Edited by L. Indarwati. Yogyakarta: PT
Kanisius.
Sulisworo, D., Budijati, S.M. and Hutami, M.W. (2018)
‘Analisis Pengaruh Komponen Teknologi Terhadap
Daya Saing Ukm Industri Genteng’, MATRIK (Jurnal
Manajemen dan Teknik), 7(1), p. 17. Available at:
https://doi.org/10.30587/matrik.v7i1.362.
Sun, G. and Guan, B. (2024) ‘Enterprise Audit Risk
Assessment and Prevention Based on AHP Analysis’,
Scalable Computing Practice and Experience, 25(3), pp.
2013–2020. Available at:
https://doi.org/10.12694/scpe.v25i3.2688.
Sunarjo, W.A. (2024) Buku Ajar Manajemen Inovasi. 1st edn.
Pekalongan: PT Nasya Expanding Management
(Penerbit NEM).
Susanto, R. (2009) ‘Konsep Teknologi’, in Modul
Perkuliahan, pp. 1–80.
Tan, C. and Lee, S.Z. (2021) ‘Adoption of Enterprise Risk
Management (ERM) in Small and Medium-Sized
Enterprises: Evidence From Malaysia’, Journal of
Accounting & Organizational Change, 18(1), pp.
100–131. Available at: https://doi.org/10.1108/jaoc-11-
2020-0181.
Taneo, S.Y.M. et al. (2021) INOVASI DISRUPTIF:
STRATEGI UNTUK MEMENANGKAN USAHA.
Yogyakarta: CV. Andi OFFSET. Available at:
https://books.google.co.id/books?id=ERVIEAAAQBAJ
&pg=PA52&dq=faktor+pendorong+inovasi&hl=en&ne
wbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjWp-
Ko5-
aHAxVK1jgGHWSDF24Q6AF6BAgMEAI#v=onepag
e&q=faktor pendorong inovasi&f=false.
Taylor, M. and Taylor, A. (2012) ‘The technology life cycle:
Conceptualization and managerial implications’,
International Journal of Production Economics, 140(1),
pp. 541–553. Available at:
https://doi.org/10.1016/j.ijpe.2012.07.006.
Tidd, J. and Bessant, J. (2018) ‘INNOVATION
313 Model Manajemen Teknologi Berbasis Risiko
313
MANAGEMENT CHALLENGES: FROM FADS TO
FUNDAMENTALS’, International Journal of
Innovation Management, 22(05), p. 1840007. Available
at: https://doi.org/10.1142/S1363919618400078.
Tiwari, A. et al. (2007) ‘A framework for implementing cost
and quality practices within manufacturing’. Available
at: https://doi.org/10.1108/17410380710763886.
UNIDO (2018) ‘ISO 3100-2018 Risk
management—Principles and guidance’.
Utomo, S. and Setiastuti, N. (2019) ‘Penerapan Metode
Technometrik Untuk Penilaian Kapabilitas Teknologi
Industri Galangan Kapal Dalam Menyongsong Era
Industri 4.0’, J-SAKTI (Jurnal Sains Komputer dan
Informatika), 3(1), p. 100. Available at:
https://doi.org/10.30645/j-sakti.v3i1.105.
Visure (2023) ‘AI dan Pembelajaran Mesin untuk Manajemen
Risiko’.
Viyanto, A.R. et al. (2013) ‘Manajemen Risiko Teknologi
Informasi: Studi Kasus pada Perusahaan Jasa’,
ComTech: Computer, Mathematics and Engineering
Applications, 4(1), p. 43. Available at:
https://doi.org/10.21512/comtech.v4i1.2682.
Volberda, H.W., Van Den Bosch, F.A.J. and Heij, C.V.
(2013) ‘Management Innovation: Management as
Fertile Ground for Innovation’, European Management
Review, 10(1), pp. 1–15. Available at:
https://doi.org/10.1111/emre.12007.
Wahyudiana, R.S. (2022) Sumber Daya Manusia Dalam
Proses Transfer Teknologi. Kuala Lumpur: Syiah Kuala
University Press.
Wahyuni, H.C. (2023) Buku Ajar Manajemen Teknologi
Pada Industri Penulis.
Wang, M.H. (2011) ‘A cost-based FMEA decision tool for
product quality design and management’, Proceedings
of 2011 IEEE International Conference on Intelligence
and Security Informatics, ISI 2011, pp. 297–302.
Available at: https://doi.org/10.1109/ISI.2011.5984101.
Wicaksono, B.P., Widyasrini, D.A. and Qur’aini, P.I. (2021)
Dari Hulu Ke Hilir Perjalanan Sebuah Alat Kesehatan.
Yogyakarta: UGM Press.
WikiHow (2022) ‘Cara Mengembangkan Perencanaan
Manajemen Risiko’.
Williams, A. et al. (2017) ‘Systems thinking: A review of
sustainability management research’, Journal of Cleaner
Production, 148, pp. 866–881. Available at:
https://doi.org/10.1016/j.jclepro.2017.02.002.
Word Economic Forum (2023) ‘Strategising cybersecurity:
Why a risk-based approach is key’.
www.skripsi.id (2015) ‘Pengertian Risiko Menurut Para
Ahli’, p. 2015.
Yoshiura, L.J.M. et al. (2023) ‘A MULTICRITERIA
DECISION MODEL FOR RISK MANAGEMENT
MATURITY EVALUATION’, Pesquisa Operacional,
315 Model Manajemen Teknologi Berbasis Risiko
315
43. Available at: https://doi.org/10.1590/0101-
7438.2023.043.00270186.
Yuliani, Ramli, A. and Rakib, M. (2022) ‘Konsep Inovasi
Usaha Untuk Meningkatkan Kinerja Usaha Mikro Kecil
dan Menengah’, 4(1), pp. 65–74.
Yuningsih, E. and Silaningsih, E. (2020) Manajemen Bisnis
& Inovasi.
Zhang, H. and Sun, Q. (2018) ‘An integrated approach to risk
assessment for special line shunting via fuzzy theory’,
Symmetry, 10(11). Available at:
https://doi.org/10.3390/sym10110599.
model: a new tool for improved risk management and
feedback’, INCOSE International Symposium, 31(1),
pp. 614–633. Available at:
https://doi.org/10.1002/j.2334-5837.2021.00858.x.
Abidin, N.H.Z. (2017) ‘Factors Influencing the
Implementation of Risk-Based Auditing’, Asian Review
of Accounting, 25(3), pp. 361–375. Available at:
https://doi.org/10.1108/ara-10-2016-0118.
Adiantoro, B. (2020) ‘Analisis Kemampuan Teknologi Pt X
Dengan Pendekatan Teknometrik Dan Analytical
Network Process (Anp)’, Bina Teknika, 15(2), p. 85.
Available at: https://doi.org/10.54378/bt.v15i2.1024.
Adyuta, H.R. and Prabandari, S.P. (2022) ‘PENGARUH
ORIENTASI KEWIRAUSAHAAN, INOVASI
RADIKAL, DAN STRATEGI BISNIS TERHADAP
KINERJA PERUSAHAAN’, JURNAL
KEWIRAUSAHAAN DAN INOVASI, 1(3), pp.
315–323.
Ágoston, S.M.I., van Mourik, P.C. and Strengers, P.F.W.
(2011) ‘Quality risk management: a valuable tool in
implementing, maintaining and improving a quality
management system’, ISBT Science Series, 6(1), pp.
52–55. Available at: https://doi.org/10.1111/j.1751-
2824.2011.01435.x.
Ajjan, H., Kumar, R.L. and Subramaniam, C. (2016)
‘Information technology portfolio management
implementation: a case study’, Journal of Enterprise
Information Management, 29(6), pp. 841–859.
Available at: https://doi.org/10.1108/JEIM-07-2015-
0065.
Alam, W.Y. et al. (2023) Menggali Potensi Manajemen
Inovasi. Edited by A. Sofatunisa. Sumedang: CV. Mega
Press Nusantara.
Almeida, N.M. et al. (2015) ‘Engineering risk management in
performance-based building environments’, Journal of
Civil Engineering and Management, 21(2), pp.
218–230. Available at:
https://doi.org/10.3846/13923730.2013.802740.
De Almeida, N.M. et al. (2015) ‘Managing the technical risk
of performance-based building structures’, Journal of
Civil Engineering and Management, 21(3), pp.
384–394. Available at:
https://doi.org/10.3846/13923730.2014.893921.
Altheide, D. (2010) ‘Risk communication and the’, Intellect,
2(2), pp. 145–158. Available at:
https://doi.org/10.1386/cjcs.2.2.145.
Amirshenava, S. and Osanloo, M. (2018) ‘Mine closure risk
management: An integration of 3D risk model and
MCDM techniques’, Journal of Cleaner Production,
184, pp. 389–401. Available at:
295 Model Manajemen Teknologi Berbasis Risiko
295
https://doi.org/10.1016/j.jclepro.2018.01.186.
An, M., Chen, Y. and Baker, C.J. (2011) ‘A fuzzy reasoning
and fuzzy-analytical hierarchy process based approach
to the process of railway risk information: A railway
risk management system’, Information Sciences,
181(18), pp. 3946–3966. Available at:
https://doi.org/10.1016/j.ins.2011.04.051.
Anes, V. et al. (2018) ‘A new risk prioritization model for
failure mode and effects analysis’, Quality and
Reliability Engineering International, 34(4), pp.
516–528. Available at:
https://doi.org/10.1002/qre.2269.
Anggrahini, D., Karningsih, P.D. and Sulistiyono, M. (2015)
‘Managing Quality Risk in a Frozen Shrimp Supply
Chain: A Case Study’, Procedia Manufacturing, 4(Iess),
pp. 252–260. Available at:
https://doi.org/10.1016/j.promfg.2015.11.039.
Arief, J. and Hakim, R. (2003) ‘Studi Pengembangan Model
Manajemen Risiko Usaha Bangunan Baru C-117 C-
118’, pp. 117–123.
Arum, A. and Payamta, P. (2022) ‘Analysis Of the
Effectiveness of Risk Based Internal Audit
Implementation: A Case Study’, Quality - Access to
Success, 23(190). Available at:
https://doi.org/10.47750/QAS/23.190.09.
Aryanto, R. (2023) Open Innovation: Berkolaborasi untuk
Menjadi Unggul, PPM Manajemen : Solusi Manajemen
Terintergrasi. Available at: https://ppm-
manajemen.ac.id/open-innovation-berkolaborasi-untuk-
menjadi-unggul-bagian-2/ (Accessed: 5 August 2024).
Asadi, P. et al. (2018) ‘Project Risk Evaluation by Using a
New Fuzzy Model Based on Elena Guideline’, Journal
of Civil Engineering and Management, 24(4), pp.
284–300. Available at:
https://doi.org/10.3846/jcem.2018.3070.
Atle ØdegårdandStål Bjørkly (2021) Improving Interagency
Collaboration, Innovation and Learning in Criminal
Justice Systems, Improving Interagency Collaboration,
Innovation and Learning in Criminal Justice Systems.
Edited by S. Hean et al. Cham: Springer International
Publishing. Available at: https://doi.org/10.1007/978-3-
030-70661-6.
Aziz, I. (2024) Inovasi Menemukan Cara Baru dalam
Mengembangkan Bisnis: Motivasi Bisnis bagi Pemula.
Yogyakarta: CAHAYA HARAPAN.
Aziz, R.Z. and Wahyuni, H.C. (2023) ‘Strategy To Increase
Technological Sophistication To Increase Helmet
Productivity With Technometric Methods And 5W1H’,
Indonesian Journal of Innovation Studies, 23, pp. 1–18.
Available at: https://doi.org/10.21070/ijins.v23i.1045.
Badin, P. and Hamid, H. (2022) ‘Risk Management Theory
and Model in Teacher Characters Building Course: A
Literature Review’, ANP Journal of Social Sciences and
Humanities, 3(1), pp. 10–18. Available at:
https://doi.org/10.53797/anp.jssh.v3i1.2.2022.
297 Model Manajemen Teknologi Berbasis Risiko
297
Bahauddin, A. and Minata, P.R. (2015) ‘Analisis dan Strategi
Penanganan Risiko Supply Chain Pada PT . Batik
Banten Indonesia Menggunakan AHP dan’, 14(1), pp.
69–80.
Ball-King, L.N. (2022) ‘Are Misunderstandings over “Risk”
Contributing to Difficulties in Assessing and Managing
Safety in the Public Domain?’, Journal of Service
Science and Management, 15(05), pp. 516–530.
Available at: https://doi.org/10.4236/jssm.2022.155030.
Bell, M. (2009) ‘Innovation, Sustainability, Development: A
New Manifesto Innovation Capabiliies and Directions
of Development’, in.
Bhattacharya, J. (2015) ‘Quality Risk Management-
Understanding and Control the Risk in Pharmaceutical
Manufacturing Industry’, International Journal of
Pharmaceutical Science Invention ISSN, 4(1), pp.
29–41.
Binar Academy (2023) ‘70% Perusahaan Gagal
Bertransformasi Digital, Ini Penyebabnya’.
Boehm, J. et al. (2019) ‘The risk-based approach to
cybersecurity’. McKinsey Company.
Brown, P. (2020) ‘Studying COVID-19 in light of critical
approaches to risk and uncertainty: research pathways,
conceptual tools, and some magic from Mary Douglas’,
Health, Risk and Society, 22(1), pp. 1–14. Available at:
https://doi.org/10.1080/13698575.2020.1745508.
BSNI (2018) Manajemen Risiko Berbasis SNI ISO 31000. 1st
edn. Edited by K. Nasrudin Irawan, Mayastria
Yekttiningtyas and W.S.S. Andriani. Jakarta: Badan
Standardisasi Nasional Indonesia.
Carmignani, G. (2009) ‘An integrated structural framework to
cost-based FMECA : The priority-cost FMECA’, 94,
pp. 861–871. Available at:
https://doi.org/10.1016/j.ress.2008.09.009.
Casban, Marfuah, U. and Rosyadi, L.S. (2021) ‘Penerapan
Metode Teknometrik untuk Mengukur Kontribusi
Komponen Teknologi dalam Proses Produksi Industri
Kecil dan Menengah’, JISI: Jurnal Integrasi Sistem
Industri, 8(2), p. 1. Available at:
https://doi.org/10.24853/jisi.8.2.1-12.
Chang, B. (2023) ‘Customer Risk Management and CAPM
Model Application’, Modern Economics &
Management Forum, 4(3), p. 47. Available at:
https://doi.org/10.32629/memf.v4i3.1372.
Chockalingam, A., Dabadghao, S. and Soetekouw, R. (2018)
‘Strategic risk, banks, and Basel III: estimating
economic capital requirements’, Journal of Risk
Finance, 19(3), pp. 225–246. Available at:
https://doi.org/10.1108/JRF-11-2016-0142.
Culp, C.L. (2001) The risk management process: Business
strategy and tactics. John Wiley & Sons.
Dede, O.Ç. (2020) ‘Integrating Heather Douglas’ Inductive
Risk Framework with an Account of Scientific
299 Model Manajemen Teknologi Berbasis Risiko
299
Evidence: Why and How?’, Perspectives on Science,
28(6), pp. 737–763. Available at:
https://doi.org/10.1162/posc_a_00358.
Deloitte (2023) ‘Menuju Penerapan Manajemen Risiko dan
Tata Kelola Terintegrasi Playbook & Deloitte Point of
View’.
Dewi, R.I. and Ilham, I. (2023) ‘Analisis Manajemen Risiko
pada UMKM Menggunakan Iso 31000’, Jurnal Bisnis,
Manajemen, Dan Informatika (Jbmi), 20(2), pp.
124–135. Available at:
https://doi.org/10.26487/jbmi.v20i2.32130.
Digital Transformasi Indonesia-DTI (2023) ‘8 Perusahaan
yang Sukses Melakukan Transforamsi Digital’.
digital worker (2023) ‘Perusahaan yang Sudah Menerapkan
Transformasi Digital’.
Dimyati, M. (2022) Metode Penelitian untuk Semua
Generasi. Jakarta: UI Publishing.
Duval, C. et al. (2012) ‘A Bayesian network-based integrated
risk analysis approach for industrial systems:
Application to heat sink system and prospects
development’, Proceedings of the Institution of
Mechanical Engineers, Part O: Journal of Risk and
Reliability, 226(5), pp. 488–507. Available at:
https://doi.org/10.1177/1748006X12451091.
Elliott, M.W. (2018) Risk management principles and
practices. American Institute for Chartered Property
Casualty Underwriters.
Evans, R. et al. (2008) ‘The Caries Management System: an
evidence‐based preventive strategy for dental
practitioners. Application for adults’, Australian Dental
Journal, 53(1), pp. 83–92. Available at:
https://doi.org/10.1111/j.1834-7819.2007.00004.x.
Ezrahovich, A.Y. et al. (2017) ‘Risk-based thinking of ISO
9001:2015 - The new methods, approaches and tools of
risk management’, Proceedings of the 2017
International Conference ‘Quality Management,
Transport and Information Security, Information
Technologies’, IT and QM and IS 2017, pp. 506–511.
Available at:
https://doi.org/10.1109/ITMQIS.2017.8085872.
Fan, L. and Shaffer, S. (2004) ‘Efficiency versus risk in large
domestic US banks’, Managerial Finance, 30(9), pp.
1–19. Available at:
https://doi.org/10.1108/03074350410769245.
Fortune Indonesia (2023) ‘Ada 70 perusahaan gagal
bertransformasi digital ini penyebabnya’.
Galvin, J. (2017) ‘Critical role of risk management in ground
engineering and opportunities for improvement’,
International Journal of Mining Science and
Technology, 27(5), pp. 725–731. Available at:
https://doi.org/10.1016/j.ijmst.2017.07.005.
Ghodang, H. and Fidela (2023) Kepemimpinan
Technopreneurship. Bogor: Halaman Moeka
301 Model Manajemen Teknologi Berbasis Risiko
301
Publishing.
Grobe, D., Douthitt, R. and Zepeda, L. (1999) ‘Consumer risk
perception profiles regarding recombinant bovine
growth hormone (rbGH)’, Journal of Consumer Affairs,
33(2), pp. 254–275. Available at:
https://doi.org/10.1111/j.1745-6606.1999.tb00070.x.
De Groot, K. and Thurik, R. (2018) ‘Disentangling Risk and
Uncertainty: When Risk-Taking Measures Are Not
About Risk’, Frontiers in Psychology, 9(NOV), pp. 1–7.
Available at: https://doi.org/10.3389/fpsyg.2018.02194.
Handayani, R., Utami, E. and Luthfi, E.T. (2023) ‘Systematic
Literature Review on Auditing Information Technology
Risk Management Using the COBIT Framework’,
Prisma Sains Jurnal Pengkajian Ilmu Dan Pembelajaran
Matematika Dan Ipa Ikip Mataram, 11(4), p. 1028.
Available at: https://doi.org/10.33394/j-ps.v11i4.8871.
Handoko, E. (2022) Perusahaan Perlu Menerapkan Transfer
Teknologi dan Bagaimana Proses Transfer Teknologi?,
Kompasiana Beyond Blogging. Available at:
https://www.kompasiana.com/edwinhandoko2833/6294
660bbb448654173782c2/perusahaan-perlu-
menerapkan-transfer-teknologi-dan-bagaimana-proses-
transfer-teknologi?page=all (Accessed: 9 August 2024).
Haning, M.T., Hasniati and Tahili, M.H. (2020) PUBLIC
TRUST: DALAM PELAYANAN ORGANISASI
PUBLIK KONSEP, DIMENSI DAN STRATEGI. 1st
edn. Makassar: UPT Unhas Press. Available at:
https://books.google.co.id/books?id=xrsXEAAAQBAJ
&pg=PA298&dq=Definisi+Inovasi&hl=en&newbks=1
&newbks_redir=0&sa=X&ved=2ahUKEwj9hPCRz-
aHAxVtyzgGHbcvPag4KBDoAXoECAQQAg#v=onep
age&q=Definisi Inovasi&f=false.
Harahap, N.S. (2014) ‘Manajemen Risiko Teknologi
Informasi Menggunakan Framework ISO 31000 (Studi
Kasus: Sistem Infrastruktur TI Telkom Indonesia)’,
Jurnal Sains dan Teknologi Industri, 9(1), pp. 52–66.
Harpster, R.A. (2016) ‘How FMEAs can be the cornerstone
of ISO 2001:2015 compliant risk based quality
management system’, Proceedings - Annual Reliability
and Maintainability Symposium, 2016-April. Available
at: https://doi.org/10.1109/RAMS.2016.7448088.
Hartanto, E.T., Ciptomulyono, U. and Ahmadi, A. (2016)
‘Aplikasi Failure Mode Effect and Criticality Analysis
(Fmeca) Dalam Penentuan Interval Waktu Penggantian
Komponen Kritis Radar Jrc Jma 5310 Pada Kri Satuan
Kapal Patroli Koarmatim’, Asro Journal-Sttal, 6, pp.
1–12.
hasbimutsani (2021) ‘Pengertian Risiko – Jenis, Sumber,
Karakteristik, Dan Contohnya Lengkap’, pp. 1–5.
Hassan, A. and Dayarian, I. (2008) ‘Cost-based FMEA and
ABC Concepts for Manufacturing Process Plan
Evaluation’, pp. 197–202.
Hillson, D. and Murray-Webster, R. (2017) Understanding
and Managing Risk Attitude. Routledge. Available at:
303 Model Manajemen Teknologi Berbasis Risiko
303
https://doi.org/10.4324/9781315235448.
Himamul ’aliyah, S. et al. (2020) ‘Analisis Teknometrik Pada
Galangan Kapal Milik Kud (Koperasi Unit Desa)
Sarono Mino Di Kecamatan Juwana, Kabupaten Pati,
Jawa Tengah’, Journal of Fisheries Resources
Utilization Management and Technology, 9(1), pp.
64–73.
Hubbard, D.W. (2020) The Failure of Risk Management, The
Failure of Risk Management: Why It’s Broken and
How to Fix It. Wiley. Available at:
https://doi.org/10.1002/9781119521914.
IBM (no date) ‘Apa itu manajemen risiko siber?’ IBM.
Indriartiningtias, R. (2010) ‘Diktat manajemen teknologi’.
Integra Tehnologi Solisi (2023) ‘Ini Dia Perbedaan Tata
Kelola IT dan Manajemen IT’.
Iswahyudi, M.S. et al. (2023) PENGANTAR TEKNOLOGI
MANAJEMEN BISNIS. Batam: Yayasan Cendikia
Mulia Mandiri.
jamescookuniversity (2019) ‘Risk Assessment and Quality
Project Management’. James Cook University
Australia.
Julien Florkin (2024) ‘AI dalam Manajemen Risiko: 7 Aspek
Kuat’.
Karim, M.S.A., San, O.T. and Muhammad, H. (2023) ‘The
Decline of Project Management Maturity Models: A
Review Paper’, International Journal of Academic
Research in Business and Social Sciences, 13(5).
Available at: https://doi.org/10.6007/ijarbss/v13-
i5/16972.
Khansa, A. (2021) Pengertian Teknologi: Jenis-Jenis,
Manfaat, Dampak Negatif dan Positif, Gramedia Blog.
Available at: https://www.gramedia.com/literasi/iptek/
(Accessed: 2 August 2024).
Khatib, M. El, Shehhi, H. Al and Nuaimi, M. Al (2023) ‘How
Big Data and Big Data Analytics Mediate
Organizational Risk Management’, Journal of Financial
Risk Management, 12(01), pp. 1–14. Available at:
https://doi.org/10.4236/jfrm.2023.121001.
Koulinas, G.K. et al. (2019) ‘Risk assessment using fuzzy
TOPSIS and PRAT for sustainable engineering
projects’, Sustainability (Switzerland), 11(3). Available
at: https://doi.org/10.3390/su11030615.
Lawlor, A. and Crow, D. (2018) ‘Risk-Based Policy
Narratives’, Policy Studies Journal, 46(4), pp. 843–867.
Available at: https://doi.org/10.1111/psj.12270.
Lesmono, R. (2024) ‘Risiko Menurut ISO 31000 : Wajah
Lain dari Kesempatan’, pp. 2–7.
Lestari, E.R. (2019) Manajemen Inovasi: Upaya Meraih
Keunggulan Kompetitif. 1st edn. Malang: UB Press.
Lewis, L.K. et al. (2006) ‘Advice on communicating during
organizational change: The content of popular press
books’, Journal of Business Communication, 43(2), pp.
305 Model Manajemen Teknologi Berbasis Risiko
305
113–137. Available at:
https://doi.org/10.1177/0021943605285355.
Liliweri, A. (2011) Komunikasi Serba Ada Serba Makna. 1st
edn. Jakarta: Kencana Prenada Media Group. Available
at:
https://books.google.co.id/books?id=MBZNDwAAQB
AJ&pg=PA847&dq=definisi+teknologi&hl=en&newbk
s=1&newbks_redir=0&sa=X&ved=2ahUKEwiYm8jzv
OaHAxUOR2wGHYClCjc4PBDoAXoECA0QAg#v=o
nepage&q=definisi teknologi&f=false.
Liliweri, P.D.A. (2021) Sistem Peralatan Hidup dan
Teknologi: Seri Pengantar Studi Kebudayaan.
Yogyakarta: NUSAMEDIA. Available at:
https://books.google.co.id/books?id=5hVtEAAAQBAJ.
Liu, Y. and Ruan, K. (2023) ‘Application of Kano Model in
Risk Identification of Software Development Projects’,
BCP Business & Management, 40, pp. 33–39.
Available at:
https://doi.org/10.54691/bcpbm.v40i.4357.
Lund, M.S., Solhaug, B. and Stølen, K. (2011) Model-Driven
Risk Analysis, Journal of Chemical Information and
Modeling. Berlin, Heidelberg: Springer Berlin
Heidelberg. Available at: https://doi.org/10.1007/978-3-
642-12323-8.
Ma, X. and Zhang, Y. (2021) ‘Digital Innovation Risk
Management Model of Discrete Manufacturing
Enterprise Based on Big Data Analysis’, Journal of
Global Information Management, 30(7), pp. 1–14.
Available at: https://doi.org/10.4018/JGIM.286761.
Malikova, M.A. (2017) ‘Building Quality Assurance ( QA )
and Risk-Based Quality Management ( RBQM )
Systems into Clinical Research Operations . An
Academic Site Perspective’, 1(617), pp. 1–8.
Marhavilas, P.K. and Koulouriotis, D.E. (2008) ‘A risk-
estimation methodological framework using
quantitative assessment techniques and real accidents’
data: Application in an aluminum extrusion industry’,
Journal of Loss Prevention in the Process Industries,
21(6), pp. 596–603. Available at:
https://doi.org/10.1016/j.jlp.2008.04.009.
Miftakhatun, M. (2020) ‘Analisis Manajemen Risiko
Teknologi Informasi pada Website Ecofo Menggunakan
ISO 31000’, Journal of Computer Science and
Engineering (JCSE), 1(2), pp. 128–146. Available at:
https://doi.org/10.36596/jcse.v1i2.76.
Milosavljević, Z. (2024) ‘Viruses and social mistrust in the
21st century: What can HIV prevention teach us about
the mistrust to COVID-19 vaccines?’, Glasnik javnog
zdravlja, 98(1), pp. 88–100. Available at:
https://doi.org/10.5937/serbjph2401088M.
Nain, A. and Rasli, A.M. (2005) PENGURUSAN
TEKNOLOGI. 1st edn. Johor: Universiti Teknologi
Malaysia.
Nazarova, H. et al. (2022) ‘Transformation of Personnel
307 Model Manajemen Teknologi Berbasis Risiko
307
Management Principles in Modern Management’,
Economics of Development, 21(4), pp. 59–67.
Available at:
https://doi.org/10.57111/econ.21(4).2022.59-67.
NEXTGEN (2022) ‘7 Contoh Transformasi Digital Yang
Berhasil Pada Perusahaan’.
Niazi, S. (2018) ‘Quality Risk Management’, Handbook of
Pharmaceutical Manufacturing Formulations, pp.
15–23. Available at:
https://doi.org/10.3109/9781420081275-4.
Nikolaenko, V. and Sidorov, A. (2023) ‘Assessment of
Project Management Maturity Models Strengths and
Weaknesses’, Journal of Risk and Financial
Management, 16(2), p. 121. Available at:
https://doi.org/10.3390/jrfm16020121.
Paté-Cornell, E. (2002) ‘Risk and uncertainty analysis in
government safety decisions’, Risk Analysis, 22(3), pp.
633–646. Available at: https://doi.org/10.1111/0272-
4332.00043.
Pialles, T. (2017) ‘Study of the Coherences and Dependencies
between Quality and Risk Management, within the
Construction Industry’, pp. 1–64.
PPATK (2022) ‘Penilaian Risiko Sektoral Tindak Pidana
Pencucian Uang Pada Tindak Pidana Penipuan SIBER
Tahun 2022’. PPATK Republik Indonesia.
Praja, A.P. et al. (2022) Kumpulan Studi Kasus Manajemen
Risiko Di Indonesia. 1st edn. Edited by C. Dr. Antonius
Alijoyo, ERMCP, Q. Prof. D. S. Priyarsono, Ph.D, and
E. Surjorimba Suroto, S.E. Ak., MScQM. Bandung: PT.
CIPTA RAYA MEKAR SAHITYA.
Pritchard, P. (2014) Risk Management. Auerbach
Publications. Available at:
https://doi.org/10.1201/9780429438967.
Purwanto, Y. and Pakaya, F. (2022) ‘Penilaian Tingkat
Teknologi Galangan Kapal Politeknik Kelautan Dan
Perikanan Bitung, Sulawesi Utara’, Jurnal Bluefin
Fisheries, 3(2), p. 15. Available at:
https://doi.org/10.15578/jbf.v3i2.112.
Puszka, S. (2021) ‘The “dirty work” of risk in Northern
Territory renal services’, Australian Journal of
Anthropology, 32(1), pp. 54–65. Available at:
https://doi.org/10.1111/taja.12390.
Putra, D.F., Chumaidiyah, E. and Rendra, M. (2020) ‘Analisis
Perbandingan Teknologi Pemilahan Sampah
Berdasarkan Proses Bisnis , Produktivitas , Dan Benefit
Cost Ratio Comparative Analysis of Waste Separation
Technology Based on Business Process , Productivity ,
and Benefit Cost Ratio’, eProceedings …, 7(2), pp.
5276–5283. Available at:
https://openlibrarypublications.telkomuniversity.ac.id/in
dex.php/engineering/article/view/12349.
Qintharah, Y.N. (2019) ‘Perancangan Penerapan Manajemen
Risiko’, Jurnal Riset Akuntansi dan Komputerisasi
Akuntansi, 10(1), pp. 67–86. Available at:
309 Model Manajemen Teknologi Berbasis Risiko
309
https://doi.org/https://doi.org/10.33558/jrak.v10i1.
Retnowati, N. and Mayasari, F. (2017) ‘Analisis Kontribusi
Komponen Teknologi Pada Pdp Kahyangan Kabupaten
Jember’, Jurnal Ilmiah Inovasi, 16(3). Available at:
https://doi.org/10.25047/jii.v16i3.310.
Rezaee, M.J., Salimi, A. and Yousefi, S. (2016) ‘Identifying
and managing failures in stone processing industry
using cost-based FMEA’, The International Journal of
Advanced Manufacturing Technology [Preprint].
Available at: https://doi.org/10.1007/s00170-016-9019-
0.
RISKINDO (2023) ‘Aman dengan ISO 31000 dalam
Management Risiko Bisnis Anda’.
Rohayati Suprihatini E.Gumbira Sa’id, M. (2005) ‘Analisis
Kondisi Komponen-Komponen Teknologi Pengolahan
Di Industri Teh Curah Indonesia’, Journal of
Agroindustrial Technology, 14(3), pp. 101–106.
Samani, M.A. et al. (2017) ‘Development of a conceptual
model for risk-based quality management system’,
Total Quality Management and Business Excellence,
pp. 1–16. Available at:
https://doi.org/10.1080/14783363.2017.1310617.
Samhuri, R., Ahma, N. and Mulyadi (2023) Strategi Inovasi
dalam Perspektif CEO Overconfidence dan CEO
Power. 1st edn. Edited by V. Alimah. Sumedang: CV.
Mega Press Nusantara.
Sanditya, R., Juniani, A.I. and Amrullah, H.N. (2019)
‘Integrated Risk Assessment on Argon Purification Unit
Based on FMECA and Fuzzy-’, 2019(IConBMT).
Santana, S. et al. (2023) ‘Analisis Implementasi Manajemen
Risiko pada UMKM Tasikmalaya (Studi Kasus UMKM
Mie Baso Sarirasa 81)’, Jurnal Bina Manajemen, 11(2),
pp. 60–75. Available at:
https://doi.org/10.52859/jbm.v11i2.309.
Schwandt, M. (2015) ‘Centralization of Risk Management in
Business Companies: A Case Study on the Role of
Specialist Departments’, Case Studies in Business and
Management, 2(1), p. 31. Available at:
https://doi.org/10.5296/csbm.v2i1.7567.
Septiana, A.R. (2020) Manajemen Inovasi: Memenangi
Kompetisi, Mengantisipasi Disrupsi. 1st edn. Jakarta:
Qnerza Publishing.
Septiani, W., Maarif, M.S. and Arkeman, Y. (2013)
‘Manajemen Risiko Inovasi Produk Olahan Susu Sapi
Berdasarkan Tahapan Proses Manajemen Inovasi’,
Jurnal Teknik Industri, 3(2). Available at:
https://doi.org/10.25105/jti.v3i2.1577.
Serafini, A. et al. (2016) ‘Use of a systematic risk analysis
method (FMECA) to improve quality in a clinical
laboratory procedure’, Annali di Igiene, 28(4), pp.
288–295. Available at:
https://doi.org/10.7416/ai.2016.2108.
Situmorang, H.F. (2022) Buku Ajar Praktek Kewirausahaan.
311 Model Manajemen Teknologi Berbasis Risiko
311
Medan: Umsu Press. Available at:
https://books.google.co.id/books?id=AphrEAAAQBAJ
&pg=PT48&dq=bentuk+risiko&hl=en&newbks=1&ne
wbks_redir=0&sa=X&ved=2ahUKEwji7KGhg-
eHAxX8xjgGHVMVO70Q6AF6BAgNEAI#v=onepage
&q=bentuk risiko&f=false.
Solikhah, M. (2024) COBIT 2019: GOVERNANCE
EXCELLENCE AND INSIGHTS FOR IT
GOVERNANCE SUCCESS. Cirebon: CV. Green
Publisher.
Standal, M.I. et al. (2023) ‘An Uncertain Risk Concept?
Perceptions of Uncertainty Among Risk Professionals
in Norwegian Petroleum Companies’, (Esrel), pp.
1943–1950. Available at: https://doi.org/10.3850/978-
981-18-8071-1_p643-cd.
Sugiharto, Y. and Wibowo, S.S. (2020) Manajemen Audit
Teknologi. Edited by L. Indarwati. Yogyakarta: PT
Kanisius.
Sulisworo, D., Budijati, S.M. and Hutami, M.W. (2018)
‘Analisis Pengaruh Komponen Teknologi Terhadap
Daya Saing Ukm Industri Genteng’, MATRIK (Jurnal
Manajemen dan Teknik), 7(1), p. 17. Available at:
https://doi.org/10.30587/matrik.v7i1.362.
Sun, G. and Guan, B. (2024) ‘Enterprise Audit Risk
Assessment and Prevention Based on AHP Analysis’,
Scalable Computing Practice and Experience, 25(3), pp.
2013–2020. Available at:
https://doi.org/10.12694/scpe.v25i3.2688.
Sunarjo, W.A. (2024) Buku Ajar Manajemen Inovasi. 1st edn.
Pekalongan: PT Nasya Expanding Management
(Penerbit NEM).
Susanto, R. (2009) ‘Konsep Teknologi’, in Modul
Perkuliahan, pp. 1–80.
Tan, C. and Lee, S.Z. (2021) ‘Adoption of Enterprise Risk
Management (ERM) in Small and Medium-Sized
Enterprises: Evidence From Malaysia’, Journal of
Accounting & Organizational Change, 18(1), pp.
100–131. Available at: https://doi.org/10.1108/jaoc-11-
2020-0181.
Taneo, S.Y.M. et al. (2021) INOVASI DISRUPTIF:
STRATEGI UNTUK MEMENANGKAN USAHA.
Yogyakarta: CV. Andi OFFSET. Available at:
https://books.google.co.id/books?id=ERVIEAAAQBAJ
&pg=PA52&dq=faktor+pendorong+inovasi&hl=en&ne
wbks=1&newbks_redir=0&sa=X&ved=2ahUKEwjWp-
Ko5-
aHAxVK1jgGHWSDF24Q6AF6BAgMEAI#v=onepag
e&q=faktor pendorong inovasi&f=false.
Taylor, M. and Taylor, A. (2012) ‘The technology life cycle:
Conceptualization and managerial implications’,
International Journal of Production Economics, 140(1),
pp. 541–553. Available at:
https://doi.org/10.1016/j.ijpe.2012.07.006.
Tidd, J. and Bessant, J. (2018) ‘INNOVATION
313 Model Manajemen Teknologi Berbasis Risiko
313
MANAGEMENT CHALLENGES: FROM FADS TO
FUNDAMENTALS’, International Journal of
Innovation Management, 22(05), p. 1840007. Available
at: https://doi.org/10.1142/S1363919618400078.
Tiwari, A. et al. (2007) ‘A framework for implementing cost
and quality practices within manufacturing’. Available
at: https://doi.org/10.1108/17410380710763886.
UNIDO (2018) ‘ISO 3100-2018 Risk
management—Principles and guidance’.
Utomo, S. and Setiastuti, N. (2019) ‘Penerapan Metode
Technometrik Untuk Penilaian Kapabilitas Teknologi
Industri Galangan Kapal Dalam Menyongsong Era
Industri 4.0’, J-SAKTI (Jurnal Sains Komputer dan
Informatika), 3(1), p. 100. Available at:
https://doi.org/10.30645/j-sakti.v3i1.105.
Visure (2023) ‘AI dan Pembelajaran Mesin untuk Manajemen
Risiko’.
Viyanto, A.R. et al. (2013) ‘Manajemen Risiko Teknologi
Informasi: Studi Kasus pada Perusahaan Jasa’,
ComTech: Computer, Mathematics and Engineering
Applications, 4(1), p. 43. Available at:
https://doi.org/10.21512/comtech.v4i1.2682.
Volberda, H.W., Van Den Bosch, F.A.J. and Heij, C.V.
(2013) ‘Management Innovation: Management as
Fertile Ground for Innovation’, European Management
Review, 10(1), pp. 1–15. Available at:
https://doi.org/10.1111/emre.12007.
Wahyudiana, R.S. (2022) Sumber Daya Manusia Dalam
Proses Transfer Teknologi. Kuala Lumpur: Syiah Kuala
University Press.
Wahyuni, H.C. (2023) Buku Ajar Manajemen Teknologi
Pada Industri Penulis.
Wang, M.H. (2011) ‘A cost-based FMEA decision tool for
product quality design and management’, Proceedings
of 2011 IEEE International Conference on Intelligence
and Security Informatics, ISI 2011, pp. 297–302.
Available at: https://doi.org/10.1109/ISI.2011.5984101.
Wicaksono, B.P., Widyasrini, D.A. and Qur’aini, P.I. (2021)
Dari Hulu Ke Hilir Perjalanan Sebuah Alat Kesehatan.
Yogyakarta: UGM Press.
WikiHow (2022) ‘Cara Mengembangkan Perencanaan
Manajemen Risiko’.
Williams, A. et al. (2017) ‘Systems thinking: A review of
sustainability management research’, Journal of Cleaner
Production, 148, pp. 866–881. Available at:
https://doi.org/10.1016/j.jclepro.2017.02.002.
Word Economic Forum (2023) ‘Strategising cybersecurity:
Why a risk-based approach is key’.
www.skripsi.id (2015) ‘Pengertian Risiko Menurut Para
Ahli’, p. 2015.
Yoshiura, L.J.M. et al. (2023) ‘A MULTICRITERIA
DECISION MODEL FOR RISK MANAGEMENT
MATURITY EVALUATION’, Pesquisa Operacional,
315 Model Manajemen Teknologi Berbasis Risiko
315
43. Available at: https://doi.org/10.1590/0101-
7438.2023.043.00270186.
Yuliani, Ramli, A. and Rakib, M. (2022) ‘Konsep Inovasi
Usaha Untuk Meningkatkan Kinerja Usaha Mikro Kecil
dan Menengah’, 4(1), pp. 65–74.
Yuningsih, E. and Silaningsih, E. (2020) Manajemen Bisnis
& Inovasi.
Zhang, H. and Sun, Q. (2018) ‘An integrated approach to risk
assessment for special line shunting via fuzzy theory’,
Symmetry, 10(11). Available at:
https://doi.org/10.3390/sym10110599.
Published
2024-08-22
How to Cite
Ambarwati, R., Sulistiyowati, W., Kusno, K., Astutik, I. R. I., & Saputri, A. H. (2024). Model Manajemen Teknologi Berbasis Risiko. Umsida Press, 1 - 328. Retrieved from https://press.umsida.ac.id/index.php/umsidapress/article/view/1480
Issue
Section
Buku Ajar
Copyright (c) 2024 Rita Ambarwati, Wiwik Sulistiyowati, Kusno Kusno, Ika Ratna Indra Astutik, Anisa Herwi Saputri
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors retain copyright and grant the Umsida Press right of first publication with the work simultaneously licensed under a Creative Commons Attribution 4.0 International License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this platform.
